What types of dimming induction lamps?
1. Set the timing light(no need for power off):
Internal software setting – dimming start time & dimming recovery time. Time can be factory set or client set, if client set, there is a need of purchasing the download manager.
Time set can be accurate to the minute – time set can not be a whole hour, and can be free time set.
Dimmable power 30%, for example: input power before dimming is 200W, input power after dimming is 140W.
0-10v dimmable one

2. Set start delay dimming( a need for power off)
Internal software sets dimming start time and dimming recovery time.
Time can be factory set or client set, if client set, there is a need of purchasing the download manager.
Time set can be accurate to the minute – time set can not be a whole hour, and can be free time set.
Dimmable power 30%, for example: input power before dimming is 200W, input power after dimming is 140W.
See Chart 1
external control 0-10v dimming

External voltage is lower than 3V, full power output;
External voltage is higher than 3V, reducing power output;

Download instructions:
Download connects PC and ballast, which downloads PC Data into ballast’s one tool.
external control 0-10v dimming1

 

 

Fill out my online form.